Motorola QIP6200/QIP64xx - Manual (Page 32)

26
DVI or HDMI
If your TV has a DVI or HDMI input, use the set-top’s
HDMI connection for
your video using the appropriate interface cable or adapter.
Remember, if your TV has a DVI input, you will need to connect audio as
well. Refer to “Connecting Your Set-Top to an HDTV – Audio Only” after
you complete the appropriate step below.
If your TV has an HDMI input, the video and audio connections are made
with a single cable between the TV and the set-top.
•
Connect an HDMI cable to the HDMI connector on the set-top and to
the HDMI connector on your TV (no separate audio connections
are required since the HDMI interface supplies both audio and
video); or
•
Connect one end of an HDMI adaptor cable* to the HDMI connector
on the set-top and the other end of the adaptor cable to the DVI-
HDTV connector on your TV; or
•
Connect a DVI cable to the DVI-HDTV connector on your TV and to
the HDMI adapter* that you attached to the
HDMI
connector on the
set-top.
For information on configuring the set-top settings, see “Optimizing Your
Set-Top for High-Definition TV.”
* Both the HDMI adapter and the HDMI adapter cable include a DVI
interface which allows your DVI HDTV to be attached to the HDMI port.