Motorola Vanguard 305 - Manual (Page 42)

4
34
• If the screen displays the “Correct Signal Found” message, do not clear the
screen. Continue with fine-tuning the signal.
Overview of Fine-Tuning (or Peaking) the Signal
You should have the assistance of a second person to monitor the television screen
while you complete the adjustments to the satellite dish in this section.
• While your assistant watches the signal number on the Tune in Satellite
Signal menu (see previous section, “Acquiring a Signal”), you will make fine-
tuning adjustments to the LNBF, the elevation, and the compass setting.
• In addition to using the Signal reading, which appears on the Tune in Satellite
Signal menu on your TV screen, you may wish to use an external signal level
meter to verify the signal strength while you make fine-tuning adjustments for
the LNBF, elevation, and compass direction setting. As mentioned earlier, do
not try to determine the strength of the signal by judging the clarity of the
picture on the TV. Digital reception cannot be adjusted in this manner.
NOTE: As the signal grows stronger, the bar graph for signal strength will
become longer and its color will change from red to green. Also, a beeping tone
will change into a monotone.
305.book Page 34 Tuesday, April 15, 2003 11:15 AM