GE r10279v - Manual (Page 8)

TEMPLATE FOR NAMEPLATE LOCATION
To position nameplate:
• Cut template along dotted line.
• Hold or tape template behind glass
door so that it is visible from the
front side.
• Remove backing from nameplate.
• Place nameplate onto front side of
door, matching illustration on the
template.
IMPORTANT: Nameplate must
be placed on the opposite side of the
door handle.
Note: While performing installations described in this book,
safety glasses or goggles should be worn.
For Monogram ® local service in your area, call
1.800.444.1845.
Note: Product improvement is a continuing endeavor at
General Electric. Therefore, materials, appearance and
specifications are subject to change without notice.
Pub. No. 31-46122-2
Part No. 197D7840P001
12-07 JR
Printed in Slovenia
Top of Badge
Cut on Dotted Line
Top of Glass Door
Door Frame Side
Upper Left
Corner of
Glass if Hinge
is on Left
DOOR NAMEPLATE LOCATION
Upper Right
Corner of
Glass if Hinge
is on Right
Door Frame Side
GE Consumer & Industrial
Appliances
General Electric Company
Louisville, KY 40225
ge.com