beautypg.com

Garmin rino130 User Manual

Page 91

background image

Rino

®

130 Owner’s Manual

85

U

NIT

O

PERATION

>

S

ETUP

P

AGES

Display—Allows you to choose from Cardinal Letters,

Degrees or Mils.
North Reference—You can choose from True, Magnetic,

Grid or User options. If ‘User’ is chosen, you must

correct for the Magnetic Variation. The Electronic or

GPS compass uses the North Reference setting to create

a bearing.
Switch to Compass Heading when Below–Enter the

desired speed for the Rino 130 to switch from using GPS

to using the compass for guidance.
For more than…—Enter a time limit to switch to the

compass. When you travel at the speed entered above for

the time entered here, the Rino 130 switches from GPS to

the compass.

To select either option:

1. Highlight the field and then press the

Thumb

Stick In to display the options.

2. Highlight the option and press the

Thumb Stick In

to activate.

Interface Setup Page

The Interface Settings Page allows you to choose from

different input/output serial data formats. This feature

is used when connecting to external NMEA devices, a

DGPS beacon receiver, a personal computer, etc. See the

Appendix for using the Rino 130 with MapSource.

To access the Interface Setup page:

1. Press the

Page button or the Menu icon

to

open the Main Menu.

2. In the Main Menu, scroll down and select

Setup.

3. Select the

Interface icon to open the Interface

Setup page.

Interface Setup Page

This manual is related to the following products: