beautypg.com

Garmin rino130 User Manual

Page 17

background image

Rino

®

130 Owner’s Manual

11

U

NIT

O

PERATION

>

R

ADIO

P

AGE

Setting the squelch code to 0 (squelch code off) allows

you to hear all activity on the selected channel, but

you must be set to the same squelch code as the other

person(s) to transmit back. See the “Appendix” for a table

listing all of the 38 Squelch Codes and their frequencies.
As you change the main channels, the Rino 130

remembers the last channel/squelch code combination

that you were using. For example, you may set the unit

channel to 5 and squelch code to 21, then change the

main channel to 8 and squelch code to 2. If you change

the channel back to 5, the squelch code changes back to

its previous setting of 21. See the “Appendix” for more

information on FRS/GMRS and its operational aspects.

Choose from 38 squelch codes. Setting

the unit to zero will allow you to hear all

transmissions on that channel, but you must

be on the same squelch code to radio back.

To change the Channel and/or Squelch Code:

1. Using the Thumb Stick, highlight the

Channel or

Code field and then press the Thumb Stick In to

show a list of available channels/squelch codes.

2. Move the

Thumb Stick Up or Down to scroll

through the selections. Because not all the items

fit in the window, a slider bar on the right side

indicates your current position in the list.

3. Once you have highlighted the desired selection,

press the

Thumb Stick In.

This manual is related to the following products: