Garmin rino130 User Manual
Page 19
Rino
®
130 Owner’s Manual
13
U
NIT
O
PERATION
>
R
ADIO
P
AGE
The Code field is blank
when the unit is scanning or
monitoring channels.
To setup a Scanlist:
1. Using the Thumb Stick, highlight the
Option Menu
on-screen button
and press In. Highlight
Setup Scanlist and press the Thumb Stick In.
2. To add/remove a channel from the list, highlight
the channel and press the
Thumb Stick In to
add/remove the check mark in front of the name.
Only channels that are checked will be scanned.
3. To select all channels or clear all channels,
highlight either the
Select All or Clear All buttons
and press the
Thumb Stick In.
4. To Scan Current Codes, highlight the
Option
Menu and press the Thumb Stick In. Choose
the desired setting and press the
Thumb Stick In.
Scanlist Page
The Radio Page Option Menu provides the following:
Setup Radio, Setup Tones, Setup Scanlist, Use Weather
Radio/Use FRS/GMRS Radio, Turn Radio Off/On,
Turn GPS Off/On, and Enable Weather Alert. Refer to
the following pages for explanations of each item in the
Radio Page Option Menu.