Operating the rino 130 – Garmin rino130 User Manual
Page 11
Rino
®
130 Owner’s Manual
5
G
ETTING
S
TARTED
>
O
PERATING
THE
R
INO
130
Operating the Rino 130
For best results, you should initialize the GPS receiver
in your Rino 130 unit before you use it the first time. See
for instructions on initializing the unit. For most
accurate results, the compass and altimeter should also
be calibrated. Refer to the “Calibrating the Compass”
and “Calibrating the Altimeter” sections for complete
information.
The Rino 130 is programmed to provide “pop-up”
messages concerning operational characteristics and
conditions. Press the Thumb Stick In to acknowledge a
message and return to the current feature.
To use the Thumb Stick:
• Press In to enter highlighted options and to
confirm messages
• Move Up, Down, Right or Left to move through
lists, highlight fields, on-screen buttons, icons,
enter data, or move the map panning arrow
• Press In and hold to display Shortcuts Menu.
To use the page Option Menu:
1. Highlight the
Option Menu on-screen button
at the top of the display screen and then press the
Thumb Stick In to open the menu.
2. Highlight the desired menu option and press the
Thumb Stick In to activate the option.
3. To close without making a selection, move the
Thumb Stick to the Right.
To lock/unlock the buttons:
1. Press and hold the
Thumb Stick In to access the
Shortcuts Menu. Highlight
Enable Keylock and
press the
Thumb Stick In. The Talk button is now
locked.
2. To unlock, press and hold the
Page button until
“Keylock Disabled” is displayed (about 5 seconds).