GE 25880 - Manual (Page 43)

43
ANSWERER REMOTE Indicates the answering system is being
/ANSWERER REMOTE accessed remotely.
ACCESS
PAGING/ The page/intercom on base or int/transfer button
PAGING FROM on cordless handset has been pressed.
HANDSET/
PAGING FRM BASE/
PAGING HANDSET
ENTER NUMBER Prompt telling you to enter a telephone number
in one of the 10 memory locations.
H
ANDSET
S
OUND
S
IGNALS
Signal Meaning
A long warbling tone (with ringer on) Signals an incoming call
Three short beeps Page signal
One short beep (every 7 seconds) Low battery warning
T
ROUBLESHOOTING
G
UIDE
T
ELEPHONE
S
OLUTIONS
No dial tone
• Check and repeat installation steps:
Ensure the base power cord is connected to a working outlet .
Ensure the telephone line cord is connected to the base and the wall jack .
• Connect another phone to the same jack; if there is still no dial tone, the
problem might be your wiring or local service.
• The cordless handset may be out of range of the base. Move closer to
the base.
• Ensure the battery is properly charged (16 hours).
• Ensure the battery pack installed correctly.