GE 25880 - Manual (Page 17)

17
4. Press the flash/prog button on the handset until LINK BASE? shows in
the display. “ NO” is the default setting.
5. Press caller ID/vol (- or +) button on the handset to scroll to YES.
6. Press flash/prog on the handset again to confirm. You will hear a long
confirmation tone when the handset is successfully linked to the base.
D
EFAULT
S
ETTING
NOTE: This setting may be made with the base or the cordless handset.
1. Press the program/flash button on base or flash/prog button on handset
until DEFAULT SETTING or DEFAULT shows in the display. “NO” is the
default setting.
2. Use the touch-tone pad to select 1YES or 2NO, or press the caller ID (rev
or skip) button on the base or caller ID/vol (- or +) button on the handset
to scroll to YES or NO.
NOTE: If you choose “YES ” all settings in the programmable menu return to
factory defaults except day and time.
3. Press the program/flash button on base or flash/prog button on handset
again to store your selection.
B
ASIC
O
PERATION
A
NSWERING A
C
ALL
Check the display to see who is calling.
NOTE: You can only use one handset at a time. "UNAVAILABLE" will be
displayed if other handset is in use.
C
ORDLESS
H
ANDSET
1. Press the talk/end/call back button on the handset.
2. When finished, press talk/end/call back or place the handset in charging
cradle to hang up.
C
ORDED
H
ANDSET
1. Lift the handset.