GE 25880 - Manual (Page 41)

41
H
EADSET AND
B
ELT
C
LIP
O
PERATION
C
ONNECTING AN
O
PTIONAL
H
EADSET TO THE
H
ANDSET
For hands free conversation, connect the headset
(optional) to the HEADSET jack as shown. The
handset receiver and microphone are disabled
when the headset is connected.
Adjust the headset to rest comfortably on top of your
head and over your ear. Move the microphone to
approximately 2 to 3 inches from your mouth.
• Press the talk/end/call back button to answer or
place a call before using the headset.
C
ONNECTING THE
B
ELT
C
LIP
There are two slots, one on each side of the handset.
• Attach the belt clip by inserting the sides of the belt clip
into the slots. Snap the ends of the belt clip into place.
D
ISPLAY
M
ESSAGES
The following indicators show the status of a message or of the unit.
ERROR Caller information has been interrupted
during transmission or the phone line is
excessively noisy.
ENTER NAME Prompt telling you to enter the name in one of
the 10 memory locations.
DELETE ALL? Prompt asking if you want to erase all
Caller ID records.
Headset jack
Headset plug
Slot for belt clip
NOTE: The RBRC seal on the battery used in your
ATLINKS USA, Inc. product indicates that we are
participating in a program to collect and recycle
Nickel Cadmium batteries throughout the
United States. Please call 1-800-8-BATTERY for
information or contact your local recycling center.