GE 25880 - Manual (Page 33)

33
4. If the number does not dial as shown, press the format button on base
or format/answerer button on cordless handset. Repeat if necessary,
until the correct number of digits show in the display.
5. Press the talk/end/call back button on handset or speaker/call back
button on base. The number dials automatically.
NOTES: If you find it necessary to dial all local calls with the area codes included
press and hold program/flash button on base or flash/prog on handset until
SET AREA CODE appears, then enter 000.
If the number is corrupted, such as a number in a name or an alphabetical
character in a number, an error tone comes from the handset and the number
won't dial.
D
ELETING THE
C
URRENT
C
ALLER
ID R
ECORD
To delete only the record in the display:
1. Use the caller ID (rev or skip) button (on base) or caller ID/vol (- or +)
button (cordless handset) to display the desired Caller ID record.
2. Press delete button on base or del/chan button on cordless handset. The
display asks DELETE? for several seconds.
3. Press delete button on base or del/chan button on cordless handset
again to erase the record.
The display shows **DELETED**, confirming the deletion.
D
ELETING
A
LL
C
ALLER
ID R
ECORDS
To delete all the Caller ID records in memory:
1. Use the caller ID (rev or skip)button (on base) or caller ID/vol (- or +)
button (on cordless handset) to display any Caller ID record.
2. Press and hold delete button on base or del/chan button on cordless
handset. The display asks DELETE ALL? for several seconds.
3. Press delete button on base or del/chan button on cordless handset
again to erase all records. The display shows NO CALLS.