Graco 7421 User Manual

Page 78

Carefully remove the seat pad. DO NOT USE SAFETY SEAT without

the seat pad.

Machine wash on delicate cycle and drip-dry. DO NOT USE BLEACH.

Fit pad into position, then reverse the process above to properly reinstall

the harness system. You must:

Pass the shoulder straps through the appropriate slots and under the

owner’s manual pocket,

Secure the shoulder straps to the metal junction plate, and

Snap waist strap anchor buckles into rear indentations (buckles should

first be placed under the retainers opposite the flexible tab, then pulled or
pushed past the tab).

Check

that harness system is not twisted, and pull on harness system to be

sure harness is securely reinstalled.