Graco 7421 - Manual (Page 77)

Models with 5-Point Harness
To wash the safety seat pad:
1. Detach the harness shoulder
straps from the junction plate by
following the instructions on
page 34.
2. Below the owner’s manual
pocket, to the left and right, are
small anchor buckles attached to
the waist straps of the harness.
Push aside the small tab that holds
the anchor buckles in place
Ê
and
pull the anchor buckles out of their
indentations. Push a corner of each
anchor buckle back into its slot
Ë
.
3. From the front of the safety seat,
pull all shoulder and waist harness
straps through their slots.
Л
К
58