Graco 7421 - Manual (Page 46)

5.3 Removing and Attaching the Safety Seat Base
1. Squeeze base release handle at back of the safety
seat to release the attachment latch. Lift safety seat
from base as shown
Ê
.
2. To reattach seat, push it down until the safety seat
clicks into base.
3. Pull up on safety seat to be sure it is latched
firmly into base.
5.4 Adjusting the Handle
The handle can lock into any of three positions
for carrying, reclining, or sitting.
To adjust the handle:
1. Press handle adjustment buttons on both
sides of handle
Ë
.
2. Slowly rotate handle out of its locked
position.
Л
К
27