Graco 7421 User Manual

Page 39

Text mode
Original mode

Lap/shoulder combination belt with a locking

latchplate

. Once it is buckled, this type of belt

has a latchplate that will not allow the lap portion
of the belt to loosen. This seat belt does not
require a locking clip.

Lap/shoulder combination belt with a

latchplate that can slide freely along the belt

This type of belt MUST be converted to prevent
movement of the lap portion of the belt.
You must use the locking clip provided with the
safety seat (see section entitled “To install the
locking clip” on page 48), unless your vehicle’s
seat belt can be converted in another way that
is described in your vehicle owner’s manual.
Failure to use the locking clip or convert the seat
belt in another way will allow the safety seat to
move out of position. See your vehicle owner’s
manual or contact your vehicle manufacturer
for more information.

Locking clip