GE 00008005 User Manual

Page 54

• Ensure the battery is properly charged (16 hours).
• Ensure the battery pack is installed correctly.
• The handset should beep when you press the TALK/CALL BACK button and the

charge indicator on the base should be lit when the handset rests in the cradle. If
not, the battery may need to be charged.

• Place handset in charge cradle for at least 0 seconds to reset the unit.

Handset does not ring

• Make sure the handset ringer switch is turned ON, this can be done through the

handset setup menu - Ringer Volume.

• The handset may be out of range. Move closer to the base.
• You may have enabled Do Not Disturb (DND). Make sure the DND is off.
• You may have too many extension phones on your line. Try unplugging some

phones.

• Check for dial tone.

You experience static, noise, or fading in and out

• The handset may be out of range of the base. Move closer to the base.
• Make sure base is not plugged into an outlet with another household appliance.

If necessary, relocate the base.

• Charge the battery.

Unit beeps

• Clean charging contacts on cordless handset.
• See solutions for “No dial tone”.
• Replace the battery.

Memory Dialing doesn’t work

• Did you program the memory location keys correctly?
• Did you follow proper dialing sequence?