Area code, Registration – GE 00008005 User Manual

Page 17

Area Code

If you enter your local 3-digit area code in the area code menu, your local area code
does not display on the Caller ID (CID) list. Instead, you only see the local 7-digit
number. Calls received from outside your local area code will display the full 10-digits.
From the PHONE SETTING menu;

1. Use the 6 or 5 button to scroll to

SET AREA CODE.

. Press the SELECT button to enter the menu.
3. Use the number keys to enter your 3 digit area code. “ - - - “

is the default setting.

4. Press the SELECT button to save your selection. You will

hear a confirmation tone.

NOTE: To restore the default setting to “---”, press and release the

FLASH/DELETE button when SET AREA CODE shows on the display.

Registration

Your handset is pre-registered and ready to use. It is not recommended that handset
be registered again unless absolutely necessary.
From the PHONE SETTING menu;

1. Use the 6 or 5 button to scroll to

REGISTRATION.

. Press the SELECT button to enter the menu.
3. Use the 6 or 5 button to scroll to

NO or YES. The default

is NO.

4. If you select

YES, press the SELECT button to confirm.

HOLD BASE PAGE WAIT FOR BEEP shows on the display.

5. Press and hold the PAGE button on base unit until you

hear a long tone at the handset.

HANDSET X REGISTERED

shows in the handset display, where

X is the handset

number. You will hear a confirmation tone.

NOTE: After you have registered one handset, wait 10 seconds

before registering another handset to ensure successful registration.

— — —

SET AREA CODE

REGISTRATION

YES

REGISTRATION