Gateway 8300 - Manual (Page 22)

14 Gateway ALR 8300 User’s Guide
Fans
The exhaust fans provide airflow through the system to keep the interior
temperature to acceptable levels. Do not block the vents for these fans. If a
fan stops working, replace it immediately. Excessive heat within the chassis
can damage other system components.
Chassis keylock
The chassis keylock allows you to secure the panels to the chassis to prevent
unauthorized access to the system and its peripherals.
Expansion slot cover plates
These are cover plates for their corresponding expansion slots on the
system board. For more information, see “Basic features” on page 8 or
Maintaining and Troubleshooting the Gateway ALR 8300 Server .
I/O ports
The following table shows the rear panel I/O ports and their descriptions.
For the locations of the ports refer to Figure 3 on page 12.
Port Definition
Serial ports
1 and 2 These are high speed serial ports that use the
first-in-first-out (FIFO) protocol. If you have a serial
mouse, connect it to serial port 1 (COM1). Other serial
devices such as serial printers or modems are also con-
nected to these ports.
Parallel port Parallel devices such as parallel printers and scanners
can be connected to this port.
Mouse port This port supports any mouse with a miniature circular
DIN (mini-DIN) connector.
Keyboard
port This port supports any keyboard with a miniature circular
DIN (mini-DIN) connector.
Video port Connects the monitor to the integrated video controller.
Important!
-J ]SYV QSYWI LEW E
QMRM(-2 GSRRIGXSV ]SY
QYWX GSRRIGX MX XS XLI
QSYWI TSVX
4080TL.book Page 14 Tuesday, December 22, 1998 2:50 PM