Gateway 8300 - Manual (Page 18)

10 Gateway ALR 8300 User’s Guide
Buttons
The table below shows the front panel buttons and their functions. See
Figure 2 on page 9 for the locations of the buttons.
Internal 3.5-inch drive bay
The system includes an internal 3.5-inch drive bay to accommodate a
3.5-inch IDE hard drive or other 3.5-inch device that does not need to be
accessed from outside the system.
LED indicators
The table below shows the front panel indicator LEDs and their functions.
See Figure 2 on page 9 for the locations of the indicator LEDs.
Switch Function
Power Turns the system on or off.
Reset Allows you to reset the system without powering
it off and then on again
Keyboard lock Enables or disables the keyboard functions and
clears the error flag after an ECC error. Pressing
this button does not correct the error condition. If
you have not corrected the error condition, the
ECC fault LED will light again.
LED Meaning When Lit
Power The system is on.
Hard disk controller
activity The hard disk is being accessed.
P1 activity The first processor is active.
P2 activity The second processor is active.
ECC fault A memory error has been detected.
Power supply fault One of the power supplies has failed.
Hard disk activity (6) The corresponding LVD SCA drive is being
accessed.
4080TL.book Page 10 Tuesday, December 22, 1998 2:50 PM