GE 21029 - Manual (Page 46)

46
Changing the Battery
CAUTION: To reduce the risk of fire or personal injury, use only
the battery 5-2522 that is compatible with this unit.
1. Make sure the telephone is OFF (not in talk mode) before you replace
battery.
2. Remove the battery compartment cover.
3. Disconnect the cord attached to the battery pack from the jack inside the
battery compartment and remove the battery pack from the handset.
4. Insert the new battery pack and reconnect
the battery plug.
5. Put the battery compartment cover back on.
6. Place handset in the base or handset charge
cradle to charge.
If you don’t charge the handset battery
properly (for 16 hours) when you first set
up the phone and/or when you install a
new battery pack, the battery ’s long-term
performance will be compromised.
NOTE: If the battery is not properly installed in the handset, or if the
battery pack is not properly connected to the jack inside the battery
compartment. “NO BATTERY” shows in the display when the handset is
placed in the charging cradle.
NOTE: If a battery is disconnected from the phone and then reconnected,
the phone must be placed in the base or charging cradle for 2 minutes to
allow it to reset.
Battery Safety Precautions
• Do not burn, disassemble, mutilate or puncture. Like other batteries of
this type, toxic materials could be released which can cause injury.
• Keep batteries out of the reach of children.
• Remove batteries if storing over 30 days.
Battery
compartment jack
Battery pack
Battery
compartment
Battery pack
plug