GE 21029 User Manual

Page 37

3. When the receiving handset connects, press the TALK/END/call back

button on the originating handset to transfer the call.

-OR-

Press the TALK/END/call back button on the originating handset to

transfer the call. If the receiving handset does not answer within 30
seconds, the originating handset rings back and displays CALLBACK. If
the originating handset does not answer within 20 seconds, the call is
automatically dropped.

Memory

You may store ﬁfty 15-character names and 20-digit telephone numbers in
the handset memory.

Storing a Name and Number in Memory

1. Make sure the phone is OFF (not in talk mode).
2. Press the mem button to display SELECT MEMORY 01-50.
3. Press the desired memory location button (01 through 50) or use the

cid/vol ( or ) button to scroll to desired the memory location.

NOTE: If the memory location is occupied, the memory location number

and stored name and telephone number appear in the display. If the

memory location is empty, EMPTY appears in the display.

4. Press the mem button. The display shows ENTER NAME.
5. Use the touch-tone pad to enter a name (up to 15 characters). More than

one letter is stored in each of the number keys. For example, to enter Bill

Smith, press the 2 key twice for the letter B. Press the 4 key 3 times for

the letter I. Press the 5 key 3 times for the letter L. Press the 5 key 3 times

for the second letter L, and press the 1 key to insert a space between the

ﬁrst and last name. Press the 7 key 4 times for the letter S; press the 6 key

once for the letter M; press the 4 key 3 times for the letter I; press the 8

key for the letter T; press the 4 key twice for the letter H.

NOTE: If you make a mistake press the del button to backspace and erase

the wrong character(s) or number(s).