Guardian Technologies Ademco VISTA-40 - Manual (Page 110)

Р 110 Р
Section 5. SPECIFICATIONS
VISTA-40 CONTROL
Physical: 12-1/2"W X 14-1/2"H X 3"D
Electrical:
VOLTAGE INPUT: Ademco No. 1361 Plug-In Transformer (use 1361CN in Canada) or 4300
transformer (for X-10 installations) rated 16.5VAC, 40 VA.
ALARM SOUNDER OUTPUT: 10VDC-13.8VDC, 2.8 amps max., 750mA less aux. current draw
(UL1023/UL985 installations).
AUXILIARY POWER OUTPUT: 9.6VDC-13.8VDC, 750mA max. For UL installations, the accessories
connected to the output must be UL Listed, and rated to operate in the above
voltage range.
BACK-UP BATTERY: 12VDC, 4AH or 7AH gel cell. YUASA NP4-12 (12V, 4AH) or NP7-12 (12V,
7AH) recommended.
STANDBY: 4 hours min. with 750 mA aux. load using 7 AH battery.
CIRCUIT PROTECTORS: Thermal circuit breakers are used on battery input to protect against reverse
battery connections and on alarm sounder output to protect against wiring
faults (Shorts).
A solid state circuit breaker is used on auxiliary power output to protect against
wiring faults (shorts).
DIGITAL COMMUNICATOR
FORMATS SUPPORTED:
ADEMCO HIGH SPEED
ADEMCO 4+2 EXPRESS
ADEMCO LOW SPEED
ADEMCO CONTACT ID
SESCOA
RADIONICS LOW SPEED
LINE SEIZE: Double Pole
RINGER EQUIVALENCE: Ê0.7B
FCC REGISTRATION No.: ÊAC398U-68192-AL-E
6 1 2 8
REMOTE KEYPAD
1. Physical: 5-3/4" W x 4-3/4" H x 1" D (146mm x 121mm x 26mm)
2. Electrical: Voltage Input: 12VDC; Current Drain: 30mA
3. Interface Wiring:
RED: 12VDC input (+) auxiliary power
BLUE: Not Used, if present
GREEN: Data to control panel
YELLOW: Data from control panel
BLACK: Ground and (-) connection from supplemental power supply.
6 1 3 7
REMOTE KEYPAD
1. Physical: 6-1/4" W x 4-3/4" H x 1" D (159mm x 121mm x 26mm)
2. Electrical: Voltage Input: 12VDC; Current Drain: 85mA
3. Interface Wiring: Same as 6128.
6 1 3 9
REMOTE KEYPAD
1. Physical: 6-1/4" W x 4-3/4" H x 1" D (159mm x 121mm x 26mm)
2. Electrical: Voltage Input: 12VDC; Current Drain: 100mA
3. Interface Wiring: Same as 6128.
6 1 3 9 A V
REMOTE KEYPAD
1. Physical: 6-1/4" W x 4-3/4" H x 1" D (159mm x 121mm x 26mm)
2. Electrical: Voltage Input: 12VDC; Current Drain: 200mA
3. Interface Wiring: See 2-WAY VOICE KEYPADS & AUDIO ALARM
ÊVERIFICATION (AAV) section.