Garmin 520 User Manual

Page 96

Rino

520/530 Owner’s Manual

NIT

PERATION

ETUP

AGES

RTCM In/Text Out—Allows DGPS input using a

standard RTCM SC-104 format and simple ASCII text

output of location and velocity information.
None—Provides no interfacing capabilities.
If Garmin DGPS or RTCM In/NMEA Out format

is selected, additional ﬁelds are provided to control a

Garmin differential beacon receiver directly from your

unit. Tuning is automatic with Scan or you can enter the

beacon frequency and bit rate when you select User from

the Beacon list to manually tune the receiver. Refer to the

beacon receiver instructions.

To select a serial data format:

1. Highlight the

Serial Data Format ﬁeld and then

press the

Thumb Stick In.

2. Highlight an option and then press the

Thumb

Stick In to activate it.

Beacon Receiver

Setup Page