Refer to – Garmin 520 User Manual
Page 46
To calibrate the Electronic Compass:
1. Use the
Page button to access the Compass
Page.
2. Use the
Thumb Stick to highlight the Option
Menu button and press In.
3. Highlight the
Calibrate Compass option and
press the
Thumb Stick In.
4. Press the
Thumb Stick In to activate the Start
button and then follow on-screen directions for
holding and turning the unit. Hold the unit level
when calibrating the compass.
The unit displays a “Just Right,” “Too Fast,” or
“Too Slow” message to help you to adjust your
turning speed as needed.
The “Calibration Successful” message displays
when finished. If a “Calibration Failed” message
displays, repeat the process.
When you manually turn the Compass Off, it stays off
until you manually turn it On again.
To turn the compass on and off:
• Press and hold the Zoom (
Z) button. A message
appears on the screen indicating that the compass
has been turned on or off.
Calibrating the compass: Hold the unit face up
and level while slowly rotating it.
36
Rino
®
520/530 Owner’s Manual
U
NIT
O
PERATION
>
C
OMPASS
P
AGE