Garmin 520 - Manual (Page 77)

Setting up the Track Log
You can set the track recording
interval to Distance, Time, or
Automatic. You can set the Track
display resolution to High, Medium,
Low, and Lowest. You can also use
the Option Menu to delete all saved
tracks.
To use Track Log Setup options:
1. Highlight the Tracks Page Setup button on the
page and press the Thumb Stick In to display the
Setup Page.
2. You can check the Wrap When Full option by
highlighting it and then pressing the Thumb Stick
In. You can highlight the Record Method and
Interval fields and press the Thumb Stick In to
display their options. Interval options change to
accommodate the Record Method choices.
Using Track Profiles
Once you have saved a track, you
not only have a record of the path
you traveled but an altitude profile
as well. (Rino 530 Only)
To view a Track Profile:
1. With the Saved Track Page for
the desired track displayed,
press the Option Menu button to display the
Profile option.
2. Press the Thumb Stick In to display the Track
Profile.
The beginning of the track is marked by a flag and
you can scroll across the profile using the Thumb
Stick.
As you scroll, the elevation for each point is
displayed at the top of the page and the distances
of that point from the Start and End points are
displayed at the bottom of the page.
3. At any point on the profile, you can press the
Thumb Stick In to display that point on the map.
Track Log Setup Track Profile
U
NIT
O
PERATION
> T
RACKS
P
AGE
Rino ® 520/530 Owner’s Manual 67