Data field definitions, Data field definitions – Garmin 520 User Manual
Page 119
Data Field Definitions
The following data field options are available on the Map,
Navigation, Altimeter, and Trip Computer Pages.
Accuracy GPS—The estimated accuracy of the GPS signal.
Ambient Pressure—Actual pressure at unit location. (Altimeter
Page Only.)
Ascent-Average—The average vertical distance of ascents.
(Altimeter Page Only.)
Ascent-Maximum—The maximum ascent rate in feet per minute.
(Altimeter Page Only.)
Ascent-Total—The total distance ascended. (Altimeter Page
Only.)
Barometer—Ambient pressure relative to sea level. (Rino 530
Altimeter Page Only.)
Bearing—The direction from your current location to a
destination.
Course—The direction from your starting location to a
destination.
Descent-Average —The average vertical distance of descents.
(Altimeter Page Only.)
Descent-Maximum—The maximum descent rate in feet per
minute. (Altimeter Page Only.)
Descent-Total—The total distance descended. (Altimeter Page
Only.)
Distance to Destination—The remaining distance to your next
waypoint.
Distance to Next—The distance to next waypoint on your route.
ETA at Destination—The estimated time of arrival at your
destination, if you maintain your current speed and course.
ETA at Next—The estimated time of day you will arrive at your
next waypoint.
Elevation—The altitude (height) above or below sea level.
Elevation-Average—The average elevation achieved. (Altimeter
Page only)
Elevation-Maximum—The highest elevation reached. (Altimeter
Page only)
Glide Ratio—The ratio of horizontal distance traveled to vertical
distance.
Glide Ratio Dest—The glide ratio required to descend from your
present position to the destination’s elevation.
Heading—Your direction of travel as indicated by a compass, in
degrees or cardinal letters (N,S,E,W).
Rino
®
520/530 Owner’s Manual
109
A
PPENDIX
>
D
ATA
F
IELD
D
EFINITIONS