beautypg.com

Setup tones – Garmin 520 User Manual

Page 26

background image

16

Rino

®

520/530 Owner’s Manual

U

NIT

O

PERATION

>

R

ADIO

P

AGE

Setup Tones

Call Tone—When the Call button

is pressed, an attention tone is

transmitted. This option allows you

to choose one of 10 tones.
Roger Tone—When the Talk

button is released, a tone is sent to

signify the end of the transmission. This option allows

you to choose one of four tones, or set the tone to Off.
Ring Tone—When an incoming transmission is received,

an attention tone will sound. This option allows you to

choose one of 10 tones or set the tone to Off. The Ring

tone will not sound again until there has been 45 seconds

of radio inactivity.
Vibrate—Choose from On or Off to have the unit

vibrate when an incoming transmission is received. Once

received, the unit will not vibrate again until there has

been 45 seconds of radio inactivity. The unit also vibrates

at Power On when set to do so.

Message Beep—Choose from 19 options or Off to have

the unit emit a tone when a message or note is received.
Key Beep—Choose from four tones or Off to emit a tone

when a key is pressed.
Power Beep—Enable or disable the tone the unit makes

when it is turned on and off.
Turn Warning (Early)—Choose from 19 tones or Off to

signal an upcoming turn on a route.
Turn Warning (Final)—Choose from 19 tones or Off to

signal the final turn on a route.
A “Set Quiet Mode” is available to mute all tones using

the Option Menu.
Setup Scanlist

Refer to “Scanning and

Monitoring” for complete

information about this feature

and the options in

this page.

Setup Tones Page

Setup Scanlist Page