GE D-GES7600 - Manual (Page 88)

User’s Manual 84
Manageable 8/9-Port Switch
SNMP
To view and/or change all SNMP-related information, click the Advanced Setup button, and
click SNMP in the selection menu. The SNMP Configurations window appears.
As shown below, the factory-default
SNMP value is enabled and the factory-default
Community Name value is public.
Step 1: SNMP
For SNMP, specify whether it is Disabled or Enabled by clicking the drop-down list.
Step 2: Get Community Name
For Get Community Name, click in the text box and type a get community name.
Step 3: Set Community Name
For Set Community Name, click in the text box and type a set community name.
Step 4: Trap Community Name
For each Trap Community Name, click in the text box and type a trap community name.
Step 5: Trap Host IP Address
For each Trap Host IP Address, click in the text box and type a IP address for trap host 1~4.
Step 6: Cold Start Trap
For Cold Start Trap, specify whether it is Disabled or Enabled by clicking the drop-down list.
Step 7: Warm Start Trap
For Warm Start Trap, specify whether it is Disabled or Enabled by clicking the drop-down list.
Step 8: Link Down Trap
For Link Down Trap, specify whether it is Disabled or Enabled by clicking the drop-down list.