GE B640 - Manual (Page 87)

78
PAPER SIZE
RX REDUCTION
REDUCTION RATE
SEL. REDUCE DIR
PRT DIRECTION
Select the size of the loaded fax paper.
Select the amount of reduction for received faxes.
Set the reduction factor in percent.
Select reduction in width only or both width and height.
Select between unidirectional and bi-directional printing.
LTR/A4/LEGAL
ON/OFF
STANDARD/A4->LTR/
LGL->LTR
VERTICAL ONLY/HORIZ
& VERTICAL
BI-DIRECTION PRT/
PRT ONE DIRECT.
FAX PRINTER
Factory settings are in bold. For instructions on how to change a setting, refer to How to change a setting, pp. 73 and 74.
Name Description Settings
SYSTEM SETTINGS
Factory settings are in bold. For instructions on how to change a setting, refer to How to change a setting, pp. 73 and 74.
Name Description Settings
AUTO TEST PRINT
DATE FORMAT
DISPLAY LANGUAGE
TX START SPEED
RX START SPEED
ON/OFF
MM/DD/YY
DD/MM ’YY
‘YY MM/DD
ENGLISH/FRENCH/
SPANISH
14400bps/9600bps/
7200bps/4800bps
9600bps/7200bps/
4800bps
Enable/disable auto test printing whenever the BJ cartridge
is replaced.
Set the date format.
Set the language of the LCD messages.
Set the speed at which the FAXPHONE starts transmitting.
Set this to a lower speed if you have difficulties connecting
over long distance or noisy lines.
Set the speed at which the FAXPHONE starts receiving. Set
this to a lower speed if you have difficulties connecting over
long distance or noisy lines.