GE QS1800V User Manual
Page 15
3.5
Pump Priming - IMPORTANT!
QSV pumps are not designed to be self-priming.
WARNING:
THE INLET PIPING, MOTOR MODULE AND PUMP LIQUID END MUST
BE COMPLETELY FILLED WITH LIQUID (PRIMED) BEFORE START-UP
(Figure 3.4, Priming Pump Level).
Figure 3.4
Priming Water Level
WARNING:
THE PUMP MUST BE SHUT-OFF IMMEDIATELY IF PRIME IS LOST TO
AVOID POSSIBLE DAMAGE TO THE INTERNAL PARTS OF THE MOTOR
AND LIQUID END.
9
Discharge
Inlet
Water Level
This manual is related to the following products: