GE 45136 - Manual (Page 6)

6 7
Step 2 - Press and hold the Learn button
inside the Alarm Siren. The ‘ON’ indicator on
the front will begin to flash and it will sound
continuious beeps.
Step 3 -
While continuing to press the Learn
button on the Alarm Siren, press and hold
the Mute button on the side of the Control
Center for three seconds. The Control
Center will send a test signal to the Alarm
Siren. When the Alarm Siren receives the test
signal it will sound a long tone and the ‘ON’
indicator will stop flashing.
Step 4 - Release all buttons
This indicates the Alarm Siren has been linked with the
Control Center. Replace cover to Alarm Siren.
Test the Alarm Siren
Step 1 - After the Alarm Siren has been successfully
linked with the Control Center press and hold the
Mute button on the Control Center for three seconds.
Step 2 -
When the Alarm Siren receives the test
signal from the Control Center, one LED indicator
on the Alarm Siren will begin to flash. It will continue
to flash for 30 seconds. This indicates it has received
the test signal.
Installation
Turn the Alarm Siren over and adjust the triangle hang
tags as shown in digram (1). After you have turned the
triangle hang tags into the correct position, now you
are ready to install. Find the place that you would like
to hang the Alarm Siren. Use the screws included for
Alert
Chime
Off
Mute
Learn
Input DC 12V
-
+