Grizzly G0518 - Manual (Page 7)

G0518 Drum / Flap Sander -5-
SECTION 2: INTRODUCTION
We are proud to offer the Grizzly Model G0518
Drum / Flap Sander. The Model G0518 is part of
a growing Grizzly family of fine woodworking
machinery. When used according to the guide-
lines set forth in this manual, you can expect
years of trouble-free, enjoyable operation and
proof of Grizzly’s commitment to customer satis-
faction.
Grizzly is also pleased to provide this manual
with the Model G0518. It was written to guide you
through the assembly, review the safety consid-
erations, and cover the general operating proce-
dures. If you have any comments regarding this
manual, please write to us at the address below:
Grizzly Industrial, Inc.
C /
O
Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
Commentary Most importantly, we stand behind our machines.
If you have any service questions or parts
requests, please call or write us at the location
listed below:
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: [email protected]
Web Site: http://www.grizzly.com
The specifications, drawings, and photographs
illustrated in this manual represent the Model
G0518 as supplied when the manual was pre-
pared. However, owing to Grizzly’s policy of con-
tinuous improvement, changes may be made at
any time with no obligation on the part of Grizzly.
Current Grizzly machine manuals can be viewed
and printed at: www.grizzly.com.
Lack of familiarity with
this manual could
cause serious person-
al injury. Become
familiar with the con-
tents of this manual,
including all the safety
warnings.