Great Dane GSRKA1934S - Manual (Page 41)

STORAGE
STORAGE - 39
• Neutral switches faulty or not
adjusted properly. See your
authorized dealer.
• Key switch or starter faulty. See
your • authorized dealer.
• PTO engaged.
• Motion control levers and park
brake lever not in proper
position.
Battery Will Not
Charge
• Loose or corroded connections.
• Blown fuse or fusible link. See
your authorized dealer.
PTO Switch Does
Not Work
• Blown fuse.
• PTO switch faulty.
Starter Turns Slowly • Loose or corroded battery
connections.
• Low battery power-charge
battery.
• Engine oil viscosity too heavy.
• Hydraulic pump linkage out of
adjustment-pumps engaged.
Machine
If Check
Excessive Machine
Vibration
• Engine speed too slow.
• Deck drive belt not tensioned
correctly.
• Mower blades not balanced.
Machine Will Not
Move With Engine
Running
• Park brake locked.
• Transmission oil level low.
• Transmission oil cold – allow
engine to warm up.
• Pump drive belt slipping or
broken.
• Pump drive belt spring broken.
• Pump free-wheel valves open.
• Transmission problems. See your
authorized dealer.
Machine Creeps
With Engine
Running and Motion
Control Levers in a
Neutral Position
• Needs motion control linkage
adjustment.
• Needs Adjustment.
Park Brake
If Check
Park Brake Not
Working Correctly
• Park brake out of adjustment
– adjust linkage.
Steering
If Check
Steering Not
Working
• Pump free-wheel valves partially
open.
• Improper tire inflation.
• Hydrostatic transmission oil level
low.
• Traction drive loose or broken.
• Hydraulic pump or wheel motor
faulty.
Mower Deck
If Check
Discharge Chute
Plugged
• Grass is wet-mow grass only
when dry.
• Raise cutting height.
• Mow with engine at full fast
throttle.
• Ground speed too fast for
conditions.
• Correct installation of deck drive
belt.
Mower Deck
Vibrates
• Run engine at fast throttle.
• Loose hardware.
• Check/replace deck drive belt.
• Blade bolts are loose.
• Blades are bent or worn.
• Sharpen and balance blades.