Grizzly G9742 - Manual (Page 20)

-18-
G9742 Metal Cutting Bandsaw (Mfg. Since 11/06
Starting the machine:
1.. Read.the.entire.instruction.manual.
2. Make.sure.all.tools.and.foreign.objects.have.
been.removed.from.the.machine.
3.. Put. on. safety. glasses. and. secure. loose.
clothing.or.long.hair.
4.. Raise.the.bandsaw.by.the.handle.
5.. Start.the.bandsaw.while.keeping.your.finger.
near. the. ON/OFF. switch. at. all. times. dur-
ing. the. test. run.. The. bandsaw. should. run.
smoothly.with.little.or.no.vibration.
—.If.you.suspect.any.problems,.immediately.
stop. the. bandsaw. and. correct. before. con-
tinuing.
—If. you. need. any. help. with. your. bandsaw.
call.our.Tech.Support.at.(570).546-9663.
projectiles thrown from
the machine could cause
serious eye injury. Wear
safety glasses during
assembly and operation.
Test Run
The. adjustments. listed. below. have. been. per-
formed. at. the. factory.. However,. because. of.
the. many. variables. involved. with. shipping,. we.
recommend.that.you.at.least.verify.the.following.
adjustments. to. ensure. the. adjustments. remain.
unchanged.
Step-by-step. instructions. on. verifying. these.
adjustments. can. be. found. in.
SECTION 6:
MAINTENANCE. on. page 26. and. SECTION 7:
SERVICE on page 27.
factory adjustments that should be verified:
1..Blade.Tracking.(page 30).
2..Squaring.Vise.to.Blade.(page 15)..
3..Blade.Guides.(page 22).
Recommended
Adjustments