beautypg.com

Pulley cover – Grizzly G9742 User Manual

Page 19

background image

G9742 Metal Cutting Bandsaw (Mfg. Since 11/06

-17-

pulley Cover

figure 17..Positioning.the.pulley.cover.

figure 18..Belt.tension.knob.

To install the pulley cover:

1.. UNPLUG.THE.BANDSAW!

2.. Position. and. rotate. the. pulley. cover. into.

place.as.shown.in.

figure 17.

3.. Install.the.two.

1

4

-20.x.

1

2

".hex.bolts.and.wash-

ers.that.secure.the.pulley.cover.

E N T A N G L E M E N T

HAzARD! you MUST

install the pulley cover

before operating!

Otherwise, severe injury

may occur.

Belt.Tension.

Knob

When.opened,.the.pulley.cover.gives.you.access.
to.change.the.pulley.ratio.so.the.bandsaw.can.cut.
at.one.of.three.speeds.

4.. Loosen. the. belt. tension. knob. enough. to.

install.the.belt.on.the.appropriate.pulley.that.
will. give. the. required. blade. speed.. Refer. to.

Blade Speed. on. page 19. for. blade. speed.
selections.

5.. Adjust.the.belt.tension.knob.(figure 18),.so.

the. belt. has.

1

4

". deflection. when. pressed. in.

the.center,.and.close.the.cover.