Installing a flash dimm module – Genicom LN45 User Manual
Page 177
Aug 01
Genicom
Publication No. GEG-99126
GENICOM LN45 and Intelliprint mL450 User Guide
7-5
Installing a FLASH DIMM Module
1.
Ensure that the printer power switch is set to the OFF [ O ] position.
2.
Disconnect the power cord from the wall outlet.
3.
Turn thumbscrews on controller assembly counterclockwise until loose and gently pull controller
assembly towards you to remove from printer.
This manual is related to the following products: