Grizzly G0634XP - Manual (Page 12)

-12-
Model g0634Xp (Mfg. 4/11+)
4. Clean all dust and dirt off the insert and the
cutterhead pocket from which the insert was
removed, and replace the insert so a fresh,
sharp edge is facing outward.
note: Proper cleaning is critical to achieving
a smooth finish. Dirt or dust trapped between
the insert and cutterhead will slightly raise the
insert, and make noticeable marks on your-
workpieces the next time you plane.
5. lubricate the torx screw threads with a
light machine oil, wipe the excess oil off the
threads, and torque the torx screw to 55 inch/
pounds.
note: Do not overlubricate. Excess oil may
squeeze between the insert and cutterhead,
thereby lifting the insert slightly and affecting
workpiece finishes.
h9893—carbide inserts (10 pk) for g0634Xp
these indexable carbide inserts can be rotated to
provide four factory sharp edges before replace-
ment. size: 15 x 15 x 2.5mm.
accessories
figure 12. h9893 Carbide inserts.