Goodman Mfg SS-CPG36-72 - Manual (Page 7)

6 www.goodmanmfg.com SS-CPG36-72 SS-CPG36-72 www.goodmanmfg.com 7
P
roduct
S
PecificationS
P
roduct
S
PecificationS
P
rodUCt
s
PeCiFiCations
— CPG060
CPG060
0901D***B
CPG060
0901D***C*
CPG060
0903D***B
CPG060
0903D***C*
CPG060
0903B***B
CPG060
0903B***C*
Cooling Capacity
Total BTU/h
59,500 58,000 59,500 58,000 59,500 58,000
Sensible BTU/h 43,200 42,800 43,200 42,800 43,200 42,800
SEER / EER 13 / 11.0 13 / 11.1 13 / 11.0 13 / 11.1 13 / 11.0 13 / 11.1
Decibels 78 78 78 78 78 78
ARI Reference Nos. 4385065 5368225 4385066 5368226 4385066 5368226
Gas Heating Capacity
High Input /Output kBTU/h
92 / 74 92 / 74 92 / 74 92 / 74 92 / 74 92 / 74
Low Input /Output kBTU/h 69 / 55 69 / 55 69 / 55 69 / 55 69 / 55 69 / 55
Steady State Efficiency (AFUE) 80 80 80 80 80 80
Temperature Rise Range (°F) 20-50 / 15-45 20-50 / 15-45 20-50 / 15-45 20-50 / 15-45 20-50 / 15-45 20-50 / 15-45
No. of Burners 4 4 4 4 4 4
Evaporator Motor / Coil
Motor Type
Direct Direct Direct Direct Belt Belt
Indoor Nominal CFM 1,900 1,900 1,900 1,900 1,900 1,900
Piston Size (Cooling) 0.086 0.086 0.086 0.086 0.086 0.086
Filter Size (#) 14 x 20 x 2 (4) 14 x 20 x 2 (4) 14 x 20 x 2 (4) 14 x 20 x 2 (4) 14 x 20 x 2 (4) 14 x 20 x 2 (4)
Drain Size (NPT) ¾" ¾" ¾" ¾" ¾" ¾"
R-410A Refrigerant Charge (oz.) 162 100.8 162 100.8 162 100.8
Face Area (ft²) 7.8 7.8 7.8 7.8 7.8 7.8
Rows Deep/ Fins per Inch 4 / 16 4 / 16 4 / 16 4 / 16 4 / 16 4 / 16
Tube Diameter - Material 5/16 - Copper 5/16 - Copper 5/16 - Copper 5/16 - Copper 5/16 - Copper 5/16 - Copper
Belt Drive Evap Fan Data
# of Wheels (D x W)
--- --- --- --- 1 (11" x 10") 1 (11" x 10")
Motor Sheave / Blower Sheave --- --- --- --- VL44 x ⅝ / AK61 x 1 VL44 x ⅝ / AK61 x 1
Belt --- --- --- --- AX53 AX5
Condenser Fan / Coil
Horsepower / RPM
¼ / 1,090 ¼ / 1,090 ¼ / 1,090 ¼ / 1,090 ¼ / 1,090 ¼ / 1,090
Fan Diameter/ # Fan Blades 22 / 4 22 / 4 22 / 4 22 / 4 22 / 4 22 / 4
Outdoor Nominal CFM 3,800 3,800 3,800 3,800 3,800 3,800
Face Area (ft²) 17.0 13.0 17.0 13.0 17.0 13.0
Rows Deep/ Fins per Inch 2 / 18 2 / 27 2 / 18 2 / 27 2 / 18 2 / 27
Tube Diameter - Material 5/16 - Copper 5MM - Copper 5/16 - Copper 5MM - Copper 5/16 - Copper 5MM - Copper
Compressor
Quantity / Stage/ Type
1/ Single/ Scroll 1/ Single/ Scroll 1/ Single/ Scroll 1/ Single/ Scroll 1/ Single/ Scroll 1/ Single/ Scroll
Compressor RLA / LRA 26.4 / 134 26.4 / 134 16 / 110 16 / 110 16 / 110 16 / 110
Electrical Data
Voltage-Phase-Frequency
208/230-1-60 208/230-1-60 208/230-3-60 208/230-3-60 208/230-3-60 208/230-3-60
Indoor Blower HP / FLA )STD Static) 1.0 / 7.6 1.0 / 7.6 1.0 / 7.6 1.0 / 7.6 1.0 / 3.8 1.0 / 3.8
Indoor Blower LRA ---- ---- ---- ---- 24 24
Max External Static 0.9 0.9 0.9 0.9 1.0 1.0
Outdoor Fan HP / FLA ¼ / 1.40 ¼ / 1.40 ¼ / 1.40 ¼ / 1.40 ¼ / 1.40 ¼ / 1.40
Min. Circuit Ampacity¹ 42 42 29 29 25 25
Max. Overcurrent Protection (amps)² 60 60 45 45 40 40
Entrance Power Supply 1.125 1.125 1.125 1.125 1.125 1.125
Entrance Control Voltage ½" ½" ½" ½" ½" ½"
Operating Weight/Shipping (lbs) 620/ 630 610/ 635 620/ 630 610/ 635 620/ 630 610/ 635
¹ Wire size should be determined in accordance with National Electrical Codes. Extensive wire runs will require larger wire sizes.
² May use fuses or HACR-type circuit breakers of the same size as noted.
Notes
• Always check the S&R plate for electrical data on the unit being installed.
• When a factory-installed powered convenience outlet is installed in the equipment, the unit MCA (Min. Circuit Ampacity) will increase by 7.5A for
208/230V units, increase by 3.75A for 460V units, and by 3A for 575V units. The MOP (Max. Overcurrent Protection) device must be sized accordingly.