Grizzly G0594 - Manual (Page 10)

-8-
G0594 Large Chipper/Shredder
The Model G0594 was carefully packed when it
left our warehouse. If you discover the machine
is damaged after you have signed for delivery,
please immediately call Customer Service at
(570) 546-9663 for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the con-
dition of your shipment, you should inventory the
contents.
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
Unpacking
Set Up Safety
SECTION 2: SET UP
The following items are needed to complete the
set up process, but are not included with your
machine:
Description Qty
• Phillips Screwdriver .................................... 1
• Oil (see motor manual for viscosity) ...... 5 ⁄
8
qt
Items Needed for
Set Up
Location
The chipper/shredder must be placed on a firm,
flat, grass or dirt surface to prevent the machine
from tipping. DO NOT place the machine on con-
crete, asphalt, or other hard surfaces. The chips
could bounce up from the hard surface and cause
injury.
Working Clearances
Consider the length of the material to be pro-
cessed through the machine and make sure that
there is enough height above the chipper/shred-
der to accommodate the material.
Make sure the unit is located close to the area
where the chips are going to be used to reduce
carrying.
Stay clear of the discharge area. Make sure all
bystanders, children, pets, or objects that you do
not want damaged or covered in chips, are clear
of the discharge area.
Site Considerations