Grizzly G0583 - Manual (Page 21)

G0583 1 HP Canister Dust Collector -19-
This dust collector is intended for single machine
use and not designed to draw dust through long
runs and multiple ports simultaneously. We do
not recommend using ducting any longer than
10 feet. Otherwise, dust collection efficiency will
be greatly reduced. However, still consider these
general guidelines for efficient dust collection:
1. Machines that produce the most sawdust
should have the shortest run of ducting
between the dust collector and the machine.
These machines include thickness planers,
shapers, sanders, and bandsaws.
2. Ideally, you should design your shop layout
so machines will have the shortest possible
run to the dust collector.
Ducting Suggestions
3. Keep ducting directional changes to a mini-
mum. The more directional change fittings
you use, the greater the loss of overall pres-
sure.
4. Gradual directional changes are more effi-
cient than sudden directional changes (i.e.
use the largest corner radius possible when
changing hose or pipe direction).
5. The simpler the system, the more efficient
and less costly it will be.