GE EtherNAV D7600 Series - Manual (Page 49)

User’s Manual 45
Manageable 8/9-Port Switch
Step 2: Host
Move to highlight Host and press .
Step 3:
Enter 4 decimal bytes (dot separated) as the IP address to ping.
Step 4: Count
Move to highlight Count and press .
Step 5:
Specify a packet count number from 1 to 999, or type 0 for an infinite packet count.
Press .
Step 6: Size (bytes)
Move to highlight Size and press .
Step 7:
Specify a packet size from 0-1500. Press .
Step 8: Timeout (sec)
Move to highlight Timeout and press .
Step 9:
Specify a timeout value from 1-999. Press .
Step 10:
Press to start to ping when completed with the ping parameters.