GE MONACO 6000A - Manual (Page 10)

Step-by-step installation instructions.
Customer Ser
vice
Tr
oubleshooting T
ips
Installation Instr
uctions
Safety Instr
uctions
Customer Ser
vice
Tr
oubleshooting T
ips
Operating Instr
uctions
Safety Instr
uctions
Customer Ser
vice
Tr
oubleshooting T
ips
Safety Instr
uctions
10
Program the Timer
Set the timer:
When the transformer is plugged into electrical outlet, 12:00AM, SUnday will begin to flash in the time display.
Set the time of day and present day of week as follows:
A. Set the time of day:
Press the TIME/DAY button once and the hour display will begin to flash.
Press the SET/CLEAR button until the present hour of the day shows in the display. Be sure AM for
morning hours, or PM for afternoon and evening hours shows.
NOTE: Press SET/CLEAR button and quickly release to move the hour display ahead 1 at a time to the
correct hour. Or, hold the SET/CLEAR button to move the display ahead 2 hours each second, to the
correct hour.
Press the TIME/DAY button once to steady the hour display, and minutes begin to flash.
Repeat Step A. 2 to set the correct minutes.
Press the TIME/DAY button again to steady the minute display (day will begin flashing). Fig. 9 shows
the timer set at 3:30 PM.
B. Set the present day of the week:
Press the SET/CLEAR button to set the present day of the week in the display.
NOTE: Press SET/CLEAR button and quickly release to move the day display 1 at a time. Or hold the
SET/CLEAR button to move the day display ahead 2 days each second.
Press the TIME/DAY button again to steady the entire display. Fig. 9 shows the timer set at TUesday.
No other settings are needed after installing your water softener. The softener is factory set to regenerate every
Monday, Wednesday and Saturday (beginning at 2:00 AM). For most families, this gives enough soft water
for their needs. However, if you want the softener to regenerate at a different time, or on different days, or to
set for the most efficiency, see About the Water Softener System section.
2
1
4
3
2
1
Solid State Timer
SmartWater Softening System
REGENERATE NOW
VACATION ON/OFF TOUCH
HOLD
SET/CLEAR
TIME/DAY
REGENERATION
DAY
REGENERATION
TIME
Fig. 8
See the Operating section for other timer controls and features.
REGENERATE NOW
VACATION ON/OFF TOUCH
HOLD
SET/CLEAR
TIME/DAY
REGENERATION
DAY
REGENERATION
TIME
PM
TU
EE
Fig. 9 EXAMPLE: This drawing shows the
present time of day at 3:30 PM,
and the present day on TUesday.