Acquiring satellite signals, Optional ant+ sensors, Acquire satellites – Garmin Edge 500 User Manual

Page 10

Edge 500 Owner’s Manual

Getting Started

Acquiring Satellite

Signals

It may take 30 to 60 seconds to acquire

signals.
1. Go outdoors to an open area.
2. Make sure that the front of the Edge

is oriented toward the sky.

3. Wait while the Edge searches for

satellites.
Do not begin moving until the

locating satellite page disappears.

NOTE: To turn off the GPS receiver

and use the Edge indoors, see

Optional ANT+ Sensors

NOTE: If you do not need to set up

ANT+ sensors, you can skip this step.
To use an ANT+ sensor during your

ride, you must install it and pair it with

the Edge.

For heart rate monitor instructions,

For GSC

™

10 speed and cadence

For third-party ANT+ sensors, see

, refer to the manufacturer’s

instructions, and go to

•