Grandstream Networks GXW-410xv - Manual (Page 6)

LAN (or PC) Connect your PC to the LAN to find IP address from your Router/DHCP
Server. The GXW-410xv acts as a switch.
Connect to the internal LAN network or rout
WAN (or LAN) er.
VIDEO IN Connection for Analog based Video Surveillance Camera (RCA)
RESET Factory Reset button. Press for 7 seconds to reset factory default settings.
POWER IN Power adapter connection
OFF/ON Off/On switch
FXO1 - FXO8 FXO ports to be connected to physical PSTN lines from a traditional PSTN
PBX or PSTN Central Office.
F 2: D IGURE IAGRA EL
ABLE 2: D EFINITIONS OF THE GXW D ISPLAY P ANEL
M OF GXW-410 XV D ISPLAY P AN
FXO port
GXW- 410xv
Display
T
Power LED Indicates Power. Remains ON when Power is connected and unit is
turned ON.
Ready LED Remains ON after boot-up.
LAN LED Indicates LAN (or WAN) port activity
PC LED Indicates PC (or LAN) port activity
Video LED Remains solid green on boot-up. If Video IN terminal is connected,
indicates video activity.
LEDs 1 - 8 Indicate status of the respective FXO Ports on the back panel
Busy d Green) - ON (Soli
Available - OFF
NOTE: All LEDs display green when ON.
Grandstream Networks, Inc. GXW-410xv User’s Manual Page 6 of 30
Firmware 1.0.0.36 Updated: 11/2006