Firmware upgrade, Upgrade through http, Pgrade through – Grandstream Networks GXW-410xv User Manual
Page 22: Http, Igure, Creen, Shot of, Ideo, Urveillance, Irmware
F
IGURE
9:
S
CREEN
-
SHOT OF
V
IDEO
S
URVEILLANCE
*
* PC client side running VLC as monitoring station
F
IRMWARE
U
PGRADE
Our latest official release can be downloaded from:
.
Firmware (or software) upgrades can be done either via TFTP or HTTP. The corresponding configuration
settings are on the configuration page. End users should NOT touch the configuration settings that are
useful for ITSPs. To upgrade your unit firmware, follow these steps:
1. Under Advanced Settings webpage, enter your TFTP or HTTP Server IP address (or FQDN) next
to the “Firmware Upgrade: Upgrade Server” field.
2. Select via TFTP or HTTP accordingly.
3. If you plan to use Automatic Upgrade, set it to “Yes”, otherwise No (this will make it check for
upgrade every time you reboot).
U
PGRADE THROUGH
HTTP
To upgrade firmware via HTTP, the field “Firmware Upgrade and Provisioning: Upgrade Via” needs to be
set to HTTP. The “Firmware Server Path” should be set to where the firmware files are located.
For example, the user can use the following URL in the Firmware Server Path:
firmware.mycompany.com: 6688/Grandstream/1.0.0.29
where firmware.mycompany.com is the FQDN of
the HTTP server. It can also be in IP address format. “:6688” is the TCP port the HTTP server listening to,
default http server listens to port 80. “/Grandstream/1.0.0.29” is the RELATIVE directory to the root dir on
HTTP web server.
Grandstream Networks, Inc.
GXW-410xv User’s Manual
Page 22 of 30
Firmware 1.0.0.36
Updated: 11/2006