Saving the configuration changes, Rebooting from remote, Igure – Grandstream Networks GXW-410xv User Manual
Page 20: Creen, Shot of, Onfiguration, Ebooting
S
AVING THE
C
ONFIGURATION
C
HANGES
Once a change is made, press the “Update” button in the Configuration Menu. The GXW-410xv will
display the following screen to confirm that the changes have been saved. Reboot or power cycle the
GXW-410xv after all the changes are made so that those changes can take effect.
F
IGURE
7:
S
CREEN
-
SHOT OF
S
AVE
C
ONFIGURATION
R
EBOOTING FROM
R
EMOTE
The administrator can remotely reboot the unit by pressing the “Reboot” button at the bottom of the
configuration menu. The following screen will indicate that rebooting is underway.
F
IGURE
8:
S
CREEN
-
SHOT OF
R
EBOOTING
Grandstream Device Configuration
The device is rebooting now...
You may re-login by clicking on the link below in 30 seconds.
All Rights Reserved Grandstream Networks, Inc. 2005
The user can re-login to the unit after waiting for about 30 seconds.
Grandstream Networks, Inc.
GXW-410xv User’s Manual
Page 20 of 30
Firmware 1.0.0.36
Updated: 11/2006