Grandstream Networks GXW-410xv - Manual (Page 12)

E ND U SER C ONFIGURATION
Once this HTTP request is entered and sent from a Web browser, the GXW-410xv will respond with a
login screen. There are two default passwords for the login page:
User Level: Password: Webpages allowed:
End User Level 123 Only Status and Basic Settings
Administrator Level admin All pages can be browsed.
F IGURE 4: S CREEN - SHOT OF GXW-410 XV L OG - IN S CREEN
Grandstream Device Configuration
Password
Login
All Rights Reserved Grandstream Networks, Inc. 2005-2006
After login, the next configuration page is the Basic Configuration page, explained in detail in Table 6:
Web Log-in Definition.
T ABLE 6: W EB L OG - IN D EFINITIONS
Web Access Select HTTP or secure HTTPS protocol for Web Access
Web Port By default, HTTP uses port 80 and HTTPS uses port 443. This field is
for customizable web port.
End User Password This contains the password to access the Web Configuration Menu.
This field is case sensitive with a maximum length of 25 characters.
IP Address There are two modes to operate the GXW-410xv:
DHCP mode: all the field values for the Static IP mode are not used
(even though they are still saved in the Flash memory.) The GXW-
410xv acquires its IP address from the first DHCP server it discovers
from the LAN it is connected.
Using the PPPoE feature: set the PPPoE account settings. The GXW-
410xv will establish a PPPoE session if any of the PPPoE fields is set.
Static IP mode: configure the IP address, Subnet Mask, Default
Router IP address, DNS Server 1 (primary), DNS Server 2 (secondary)
fields. These fields are set to zero by default.
Time Zone Controls how the date/time is displayed according to the specified time
zone.
You may also access the Device Status page which provides details of the GXW product. The Device
Status page terms are defined in Table 7: Status Page Definitions.
Grandstream Networks, Inc. GXW-410xv User’s Manual Page 12 of 30
Firmware 1.0.0.36 Updated: 11/2006