GIGABYTE GN-B41G User Manual

Page 24

Text mode
Original mode

GN-B41G Wireless Broadband Router

Step 7.

At the command prompt, type “ipconfig/release” and press the
ENTER key..

Step 8.

At the next command prompt, type “ipconfig/renew” and press the
ENTER key..

Note: If the IP address of your GN-B41G, for example, is 192.168.1.254, your

computer’s IP address must be 192.168.1.x, where x is anything
between 1 and 253. (Note: Each computer in a network has one unique
IP located within this range. The default gateway must be
192.168.1.254).