GIGABYTE GA-K8VM800M - Manual (Page 59)

Technical Reference - 59 -
English
CMOS Setup Utility-Copyright (C) 1984-2003 Award Software
}
Standard CMOS Features
} Advanced BIOS Features
}
Integrated Peripherals
} Power Management Setup
}
PnP/PCI Configurations
} PC Health Status
}
Frequency/Voltage Control
ESC: Quit higf: Select Item
F8: Dual BIOS/Q-Flash F10: Save & Exit Setup
Top Performance
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
Load Fail-Safe Defaults (Y/N)? Y
CMOS Setup Utility-Copyright (C) 1984-2003 Award Software
} Standard CMOS Features
}
Advanced BIOS Features
} Integrated Peripherals
}
Power Management Setup
} PnP/PCI Configurations
}
PC Health Status
} Frequency/Voltage Control
ESC: Quit
higf: Select Item
F8: Dual BIOS/Q-Flash F10: Save & Exit Setup
Top Performance
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
CMOS Setup Utility-Copyright (C) 1984-2003 Award Software
}
Standard CMOS Features
}
Advanced BIOS Features
}
Integrated Peripherals
}
Power Management Setup
}
PnP/PCI Configurations
} PC Health Status
}
Frequency/Voltage Control
ESC: Quit higf: Select Item
F8: Dual BIOS/Q-Flash F10: Save & Exit Setup
Top Performance
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
Save to CMOS and EXIT (Y/N)? Y
6. Press Del to enter BIOS menu after system reboots. When you are in BIOS menu, move to Load
Fail-Safe Defaults item and press Enter to load BIOS Fail-Safe Defaults. Normally the system
redetects all devices after BIOS has been upgraded. Therefore, we highly recommend reloading the
BIOS defaults after BIOS has been upgraded.
Press Y on your
keyboard to load
defaults.
7. Select Save & Exit Setup item to save the settings to CMOS and exit the BIOS menu.
System will reboot after you exit the BIOS menu. The procedure is completed.
Press Enter on
your keyboard
Press Y on your
keyboard to
save and exit.