Grizzly 10" x 22" Benchtop Lathe G0602 - Manual (Page 8)

-6-
Model G0602/G0752 (Mfg. Since 11/12)
controls &
components
refer to figures 3–8 and the following descrip-
tions to become familiar with the basic controls of
this lathe.
d. off button: stops spindle rotation.
e. spindle speed rpm display: shows a digi-
tal readout of the spindle speed.
f. spindle speed dial: Controls the variable
spindle speed.
model g0752 control panel
figure 4. Model g0752 control panel.
F
e
B
A
C
d
model g0602 control panel
figure 3. Model g0602 control panel.
a. emergency stop button: Cuts power to
the motor and control panel when pressed.
remains depressed until reset by twisting
clockwise.
b. spindle switch: starts, stops, and reverses
spindle rotation.
c. on button: enables spindle rotation.
A
B C
g. numeric gearbox dial: Controls the
leadscrew for threading and feeding opera-
tions. to make a selection, rotate the dial to
the corresponding number displayed on the
threading or feed charts.
h. alpha gearbox dial: Controls the leadscrew
for threading and feeding operations. to
make a selection, rotate the dial to the cor-
responding letter displayed on the threading
or feed charts.
Quick change gearbox
figure 5. gearbox dials.
g h